






Downloads:
Owners
Manual
Data Sheet
|
Bio-Fighter® XL
Large commercial
coils require large UV-C fixtures to maximize surface area coverage
energy efficiently. The Bio-Fighter® XL is uniquely qualified for extra-large
applications with lamp lengths up to five feet and a class-leading
reflector surface area to cost effectively apply a high dose of UV-C
energy.
The Bio-Fighter® XL is equipped with a heavy duty T6 HO, singled ended lamp that
contains protective cathode rings to ensure filament longevity. The environment
where XL fixtures are deployed can have high relative humidity levels so a protective
boot is in place over the quick connect lamp
connection to avoid corrosion.
Features
Extra long lamps, up to 5 feet.
Polished aluminum UV-C reflector
Moisture boot seals lamp connections
Custom T6 high-output UV-C lamps
120V or 230V electronic ballast
Multiple wiring conduits for easy install
Limited lifetime warranty
Base Dimensions:
21" Model -
22"L x 2.5"W x 3.375"H
33" Model - 34"L x 2.5"W x 3.375"H
45" Model - 46"L x 2.5"W x 3.375"H
61" Model - 62"L x 2.5"W x 3.375"H
Weight:
21" Model -
3.90 lbs.
33" Model - 4.60 lbs.
45" Model - 6.40 lbs.
60" Model - 8.30 lbs.
Power:
120V standard.
230V optional.
Full
Load Amps:
1.15 @ 120V.
UV Output:
800 to 890
microwatts* depending on model.
*Measured at
12",
50 degrees, 24x24 duct, 500 fpm.
Ozone Generation:
None.
Average Bulb Life:
9000 Hours Continuous |
|
To locate a dealer in your area, check your local listings for a heating and air conditioning contractor near you.
ATTENTION!
Do Not Mount Device In Any Location That Allows Ultraviolet Light To Be Seen
After Installation.
Professional Installation
Recommended.
The Bio-Fighter®
UV-C Light System most suitable for your needs should be recommended and
installed by a UV-C trained professional.
New electrical service may be required at the installation location and this should
also be
performed by a trained professional. |