





Downloads:
Owners
Manual
Data Sheet
|
Bio-Fighter® Nomad & Nomad 2
Surface mounted
UV-C applications demand installation flexibility and the Bio-Fighter® Nomad
delivers one of the most flexible chassis designs available. The multi-input
voltage power supply, providing the installer a range of 120 to 240V, coupled
with the Nomad's innovative chassis bracket feature allow the Nomad to be
installed virtually anywhere, in or on your residential HVAC system. An optional
remote safety interlock ensures power disconnect for internally mounted fixtures
and the safety system is
compatible for insert
mount applications as well.
Features
High-intensity H-tube lamp design
Installation brackets for easy install
Multi-voltage electronic ballast
Lampholders simplify lamp replacement
Air handler viewport
Optional remote safety interlock
Optional
lamp shield
Limited lifetime warranty
Base Dimensions:
Nomad - 7"L x
3.5"W x 3.125"H
Nomad 2 - 17"L x 5.937"W x 1.5"H
Weight:
Nomad - 3.75 lbs.
Nomad 2 - 5.5 lbs.
Power:
120V to 240V
multi-voltage electronic ballast.
Full
Load Amps:
Nomad - 0.45 @
120V, 0.22 @ 240V.
Nomad 2 - 0.85 @ 120V, 0.39 @ 2340V.
UV Output:
155 to 740
microwatts* depending on model.
*Measured at
12",
50 degrees, 24x24 duct, 500 fpm.
Ozone Generation:
None
Average Tube Life:
9000 Hours Continuous
Accessories:
Remote safety switch |
 |
To locate a dealer in your area, check your local listings for a heating and air conditioning contractor near you.
ATTENTION!
Do Not Mount Device In Any Location That Allows Ultraviolet Light To Be Seen
After Installation. [More]
Professional Installation
Recommended.
The Bio-Fighter®
UV-C Light System most suitable for your needs should be recommended and
installed by a UV-C trained professional.
New electrical service may be required at the installation location and this should
also be
performed by a trained professional. |